Aspenblog970

Vex Robotics Usb Devices Driver Download For Windows Xp

Vex Robotics Usb Devices Driver Download For Windows 8.1

Before you connect your Pololu CP2102 device to a computer running Microsoft Windows, you should install its drivers:

1. Download the CP2102 drivers for Windows (4MB zip).
2. IMPORTANT: You must extract the zip archive into a temporary directory. attempt to double-click or run any of the files until you have extracted them.
3. Open the temporary directory and run the appropriate executable. If you have a 64-bit operating system, you should run pololu-cp2102-setup-x64.exe. If you have a 32-bit operating system, you should run pololu-cp2102-setup-x86.exe.
4. During the installation, Windows will ask you if you want to install the drivers. Click “Install” (Windows 10, 8, 7, and Vista) or “Continue Anyway” (Windows XP).
5. The installer should complete successfully.

To update this firmware, you will need to download the VEXnet Firmware Upgrade Utility, the VEXnet Key 2.0 Firmware Upgrade Utility and the VEXnet Serial USB Driver. The VEXnet Firmware Upgrade Utility overwrites the Master Code on the VEX ARM® Cortex®-based Microcontroller or a VEXnet Joystick to the latest version. Windows (XP or later) system with easy-C installed VEX Robot and joystick “A” to “A” (male to male) US connection cable Loading Drivers We need to load the PL-2303 controller driver (if not already done). We do this by running the VEXUSB2 software installed as part of the Easy-C install (or available on the Easy-C CD).

Windows 10, Windows 8, Windows 7, and Windows Vista users: Your computer should now automatically install the necessary drivers when you connect a Pololu CP2102 device. No further action from you is required.

Windows XP users: You need to follow steps 6–10 for each new device you connect to your computer.

The LabVIEW Robotics Module is add-on software for the LabVIEW programming environment. It delivers an extensive robotics library with built-in connectivity to robotic sensors and actuators, foundational algorithms for intelligent operation and robust perception, and motion functions for making your robot or vehicle move.

6. Connect the device to your computer’s USB port. Your computer will detect the new hardware and open the Found New Hardware Wizard.
7. When the Found New Hardware Wizard is displayed, select “No, not this time” and click “Next”.
8. On the second screen of the Found New Hardware Wizard, select “Install the software automatically” and click “Next”.
9. Windows XP will warn you again that the driver has not been tested by Microsoft and recommend that you stop the installation. Click “Continue Anyway”.
10. When you have finished the Found New Hardware Wizard, click “Finish”.

If you now go to your computer’s Device Manager and expand the “Ports (COM & LPT)” list, you should see “Pololu USB-to-Serial Adapter” as one of the COM ports.

Some software will not allow connection to higher COM port numbers. If you need to change the COM port number assigned to your USB adapter, you can do so using the Windows device manager. Bring up the properties dialog for the “Pololu USB-to-Serial Adapter” COM port and click the “Advanced…” button in the “Port Settings” tab. From this dialog you can change the COM port assigned to your device.

Related products